[mdlug] Cisco 3850 Catalyst Switch

[gib at juno.com]

That's great.  I've been spending days on this. 

---------- Original Message ----------
From: tony at bemushosting.com
To: MDLUG's Main discussion list <mdlug at mdlug.org>
Cc: gib at juno.com
Subject: Re: [mdlug] Cisco 3850 Catalyst Switch
Date: Thu, 11 Jan 2018 21:17:41 -0500


It sounds like you are adding IP address for each port. That is actually setting it up to be a router. What you need to do is put all the ports you want to be in the same network on the same VLAN number. If you want to have multiple networks / vlans then you create VLAN interfaces with IP addresses to route between the networks. When I'm there on Saturday I can help you get that all setup.Sent from Mobile - Tony Bemus, MSIA
On Jan 11, 2018 5:57 PM, gib at juno.com wrote:
Wow an actual response to one of my emails.  I have been sending email trying to get people interested in selecting a topic for the next meeting . . . 
 
 Yes.  I have a couple solutions to connect to the switch. 
 
 I have a USB cable that has the mini-USB connector.  I have a laptop that has the console software installed. 
 
 I have a console cable (Ethernet to USB). 
 
 I've been able to get one port working and connected to a laptop using Ethernet to a GigabitEthernet interface over the same subnet. 
 
 I can connect using Ethernet and the same subnet then I can launch a web console session.  I have not been able to figure out the user Id and password for the http service. 
 
 
 The thing I'm really stuck on is understanding how to get the second port configured. 
 I just don't understand what this should look like.  If I have the second one set up I may be able to use that as a model for all the other ports. 
 
 When I attempt to configure the second port similar to the first, working, port it gives me an overlap error because I'm using the same subnet. 
 
 I think I need to learn about trunking, access ports and vlans.  But it may simply be I have no idea what it should look like. 
 
 
 --------- Original Message ---------- 
 From: William Lingner <w.lingner.jr at gmail.com> 
 To: MDLUG's Main discussion list <mdlug at mdlug.org> 
 Subject: Re: [mdlug] Cisco 3850 Catalyst Switch 
 Date: Thu, 11 Jan 2018 10:36:53 -0500 
 
 Do you have the console cable to use with it 
 
 Sent from my iPhone 
 
 > On Jan 11, 2018, at 9:35 AM, "gib at juno.com" <gib at juno.com> wrote: 
 > 
 > I'm thinking of bringing in a new Cisco Catalyst 3850 switch on Saturday.  I'm hoping we can work on learning how to configure it. 
 > 
 > ____________________________________________________________ 
 > How To Remove Eye Bags & Lip Lines Fast (Watch) 
 > Fit Mom Daily 
 > http://thirdpartyoffers.juno.com/TGL3131/5a57766028a8a76606c07st01vuc 
 > _______________________________________________ 
 > mdlug mailing list 
 > mdlug at mdlug.org 
 > http://mdlug.org/mailman/listinfo/mdlug 
 _______________________________________________ 
 mdlug mailing list 
 mdlug at mdlug.org 
 http://mdlug.org/mailman/listinfo/mdlug 
 
 _______________________________________________ 
 mdlug mailing list 
 mdlug at mdlug.org 
 http://mdlug.org/mailman/listinfo/mdlug