[mdlug] Help diagnosing hardware problem - not solved

[Jeff Hanson]

On Tue, Jun 23, 2009 at 8:01 AM, Robert Adkins<radkins at impelind.com> wrote:
> Did you pop out the CMOS battery for about 5 minutes and then reapply power?
> I have found that sometimes, the BIOS can become wonky and clearing it via
> battery drain can rectify the issue. (That still doesn't mean that the old
> Power Supply is good, it could have sent the wrong voltage for the correct
> amount of time to toss the BIOS off.)

Actually a low battery can cause all sorts of problems.  Voltage
should be 3.0V minimum.