[mdlug] PC Doesn't boot after moving the box

Raymond Ingles sorceror171 at gmail.com
Sun Oct 7 15:23:47 EDT 2018


Ok, time to unseat everything. All cables. no disks, no USB, etc. (Leave
the CPU fan plugged into the motherboard, though.)

Then, plug in the just the power supply, mouse, keyboard, and monitor. See
if you can get it to boot that way.

On Oct 7, 2018 11:55 AM, "Robert James Fulner" <fulner at alumni.nmu.edu>
wrote:

I"m not 100% sure.

f I had to guess based on the unfamilar markigns on the board I'd say MSI
880GM-E43.

Please note as I said in my last mail now even with both of them plugged in
I get no display on my monitor. I just plugged my monitor into my work
laptop to verify it is still working.



Jim Fulner
National platform representative, Libertarian Party of Michigan
22100 Armada Ridge Rd.,
Armada, MI 48005

Telephony eliminates confusion 248-971-0259


On Sun, Oct 7, 2018 at 11:48 AM Raymond Ingles <sorceror171 at gmail.com>
wrote:


> What's the motherboard model? Some need two sticks to boot. Makes finding
a
> bad one a little trickier, but should be possible.
>
> On Sun, Oct 7, 2018, 11:46 AM Robert James Fulner <fulner at alumni.nmu.edu>
> wrote:
>
> > Ray,
> >
> > I tried that. With just the left memory in, just the right memory in
both
> > in and neither in. All 4 cases I now have the same problem, that now the
> > display will not turn on.
> >
> > Jim Fulner
> > National platform representative, Libertarian Party of Michigan
> > 22100 Armada Ridge Rd.,
> > Armada, MI 48005
> >
> > Telephony eliminates confusion 248-971-0259
> >
> >
> > On Sat, Oct 6, 2018 at 4:40 PM Raymond Ingles <sorceror171 at gmail.com>
> > wrote:
> >
> > > In that case... I have also seen RAM DIMMs go bad. I had to get one
> > > replaced once. I'd pull all but one stick and see if that helps. If
> not,
> > > try one stick at a time.
> > >
> > > On Sat, Oct 6, 2018, 3:04 PM Robert James Fulner <
> fulner at alumni.nmu.edu>
> > > wrote:
> > >
> > > > I have previously tried resetting the memory to no avail. I hangs
> > before
> > > I
> > > > even get to the option to enter the BIOS. Usually the "Press F12 for
> > > BIOS"
> > > > shows after this AMD screen does.
> > > >
> > > >
> > > > Jim Fulner
> > > > National platform representative, Libertarian Party of Michigan
> > > > 22100 Armada Ridge Rd.,
> > > > Armada, MI 48005
> > > >
> > > > Telephony eliminates confusion 248-971-0259
> > > >
> > > >
> > > > On Fri, Oct 5, 2018 at 3:02 PM Raymond Ingles <sorceror171 at gmail.com
> >
> > > > wrote:
> > > >
> > > > > I have seen these new UEFI BIOS systems mess up when new hardware
> is
> > > > > installed, and change their boot drive in the settings
> spontaneously.
> > > I'd
> > > > > second checking the bios settings.
> > > > >
> > > > > On Fri, Oct 5, 2018, 9:48 AM Carl T. Miller <carl at carltm.com>
> wrote:
> > > > >
> > > > > > I would very gently reseat the memory (pull it out and
> > > > > > put it back in), reseat the video card if it has one, and
> > > > > > then unplug all cables to both hard drives and verify
> > > > > > that the plugs and sockets look good.  Hopefully it
> > > > > > will boot.  If not, remove the new hard drive.  Go into
> > > > > > the BIOS to see if there is some magical setting that
> > > > > > needs tinkering.
> > > > > >
> > > > > > Good luck!
> > > > > >
> > > > > > c
> > > > > >
> > > > > >
> > > > > > On 10/05/2018 09:20 AM, Robert James Fulner wrote:
> > > > > > > Recently I put a second hard disk in my tower I plugged
> > everything
> > > in
> > > > > to
> > > > > > > make sure it worked as I expected to and then when the test
was
> > > > > > successful,
> > > > > > > I plugged everything else in (additional monitors etc. and
>  put
> > it
> > > > > back
> > > > > > > int eh case where it goes and now when I go to bott I don't
get
> > > past
> > > > > the
> > > > > > > opening AMD logo screen on boot.
> > > > > > >
> > > > > > > I suspect something got joggled loose when I moved the tower
> but
> > > > > > everything
> > > > > > > looks ok to me (lots of cables not plugged into everything but
> > I'm
> > > > > pretty
> > > > > > > sure that is how it was before.
> > > > > > >
> > > > > > > With such a symptom, where do I start? I'm hoping I didn't fry
> a
> > > > > > > motherboard or something.
> > > > > > > Jim Fulner
> > > > > > > National platform representative, Libertarian Party of
Michigan
> > > > > > > 22100 Armada Ridge Rd.,
> > > > > > > Armada, MI 48005
> > > > > > >
> > > > > > > Telephony eliminates confusion 248-971-0259
> > > > > > > _______________________________________________
> > > > > > > mdlug mailing list
> > > > > > > mdlug at mdlug.org
> > > > > > > http://mdlug.org/mailman/listinfo/mdlug
> > > > > >
> > > > > > _______________________________________________
> > > > > > mdlug mailing list
> > > > > > mdlug at mdlug.org
> > > > > > http://mdlug.org/mailman/listinfo/mdlug
> > > > > _______________________________________________
> > > > > mdlug mailing list
> > > > > mdlug at mdlug.org
> > > > > http://mdlug.org/mailman/listinfo/mdlug
> > > > >
> > > > _______________________________________________
> > > > mdlug mailing list
> > > > mdlug at mdlug.org
> > > > http://mdlug.org/mailman/listinfo/mdlug
> > > >
> > > _______________________________________________
> > > mdlug mailing list
> > > mdlug at mdlug.org
> > > http://mdlug.org/mailman/listinfo/mdlug
> > >
> > _______________________________________________
> > mdlug mailing list
> > mdlug at mdlug.org
> > http://mdlug.org/mailman/listinfo/mdlug
> >
> _______________________________________________
> mdlug mailing list
> mdlug at mdlug.org
> http://mdlug.org/mailman/listinfo/mdlug
>
_______________________________________________
mdlug mailing list
mdlug at mdlug.org
http://mdlug.org/mailman/listinfo/mdlug


More information about the mdlug mailing list