[mdlug] PC Doesn't boot after moving the box

[Carl T. Miller]

I would very gently reseat the memory (pull it out and
put it back in), reseat the video card if it has one, and
then unplug all cables to both hard drives and verify
that the plugs and sockets look good.  Hopefully it
will boot.  If not, remove the new hard drive.  Go into
the BIOS to see if there is some magical setting that
needs tinkering.

Good luck!

c


On 10/05/2018 09:20 AM, Robert James Fulner wrote:
> Recently I put a second hard disk in my tower I plugged everything in to
> make sure it worked as I expected to and then when the test was successful,
> I plugged everything else in (additional monitors etc. and   put it back
> int eh case where it goes and now when I go to bott I don't get past the
> opening AMD logo screen on boot.
>
> I suspect something got joggled loose when I moved the tower but everything
> looks ok to me (lots of cables not plugged into everything but I'm pretty
> sure that is how it was before.
>
> With such a symptom, where do I start? I'm hoping I didn't fry a
> motherboard or something.
> Jim Fulner
> National platform representative, Libertarian Party of Michigan
> 22100 Armada Ridge Rd.,
> Armada, MI 48005
>
> Telephony eliminates confusion 248-971-0259
> _______________________________________________
> mdlug mailing list
> mdlug at mdlug.org
> http://mdlug.org/mailman/listinfo/mdlug