[mdlug] Virtualbox, Openstack

[gib at juno.com]

Yes. I can bring it.

---------- Original Message ----------
From: "Carl T. Miller" <carl at carltm.com>
To: "MDLUG's Main discussion list" <mdlug at mdlug.org>
Subject: Re: [mdlug] Virtualbox, Openstack
Date: Fri, 12 Feb 2016 19:23:01 -0500

Gib, is this on a computer you can bring to the
meeting tomorrow?  I'd be interested to see what's
going on inside the host, since the error is really
describing a symptom and not the cause.

c


gib at juno.com wrote:
> Started an install  of Virtualbox with the intent to install Openstack.
> Ultimate goal is to set up Pivotal. Using these instructions:
> https://www.mirantis.com/how-to-install-openstack/ Got to the point where
> I execute the launch script in step 6.I see the fuel master running but
> not the additional 3 VMs.I don't know if the script will recover from the
> error below: Checking for VirtualBox Extension Pack... OK
> Checking for Mirantis OpenStack ISO image... OK
> Going to use Mirantis OpenStack ISO file iso/MirantisOpenStack-7.0.iso
> Checking if SSH client installed... OK
> Checking if ipconfig or ifconfig installed... OK
> Setup is done.
> Creating host-only interface
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Interface VirtualBox Host-Only Ethernet Adapter #2 was successfully
> created
> Disabling DHCP server on interface: VirtualBox Host-Only Ethernet Adapter
> #2...
> Configuring IP address 10.20.0.1 and network mask 255.255.255.0 on
> interface: VirtualBox Host-Only Ethernet Adapter #2...
> + VBoxManage hostonlyif ipconfig 'VirtualBox Host-Only Ethernet Adapter
> #2' --ip 10.20.0.1 --netmask 255.255.255.0
> + set +x
> Verifying interface VirtualBox Host-Only Ethernet Adapter #2 has IP
> 10.20.0.1 and mask 255.255.255.0 properly set.
> OK.
> Creating host-only interface
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Interface VirtualBox Host-Only Ethernet Adapter #3 was successfully
> created
> Disabling DHCP server on interface: VirtualBox Host-Only Ethernet Adapter
> #3...
> Configuring IP address 172.16.0.254 and network mask 255.255.255.0 on
> interface: VirtualBox Host-Only Ethernet Adapter #3...
> + VBoxManage hostonlyif ipconfig 'VirtualBox Host-Only Ethernet Adapter
> #3' --ip 172.16.0.254 --netmask 255.255.255.0
> + set +x
> Verifying interface VirtualBox Host-Only Ethernet Adapter #3 has IP
> 172.16.0.254 and mask 255.255.255.0 properly set.
> OK.
> Creating host-only interface
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Interface VirtualBox Host-Only Ethernet Adapter #4 was successfully
> created
> Disabling DHCP server on interface: VirtualBox Host-Only Ethernet Adapter
> #4...
> Configuring IP address 172.16.1.1 and network mask 255.255.255.0 on
> interface: VirtualBox Host-Only Ethernet Adapter #4...
> + VBoxManage hostonlyif ipconfig 'VirtualBox Host-Only Ethernet Adapter
> #4' --ip 172.16.1.1 --netmask 255.255.255.0
> + set +x
> Verifying interface VirtualBox Host-Only Ethernet Adapter #4 has IP
> 172.16.1.1 and mask 255.255.255.0 properly set.
> OK.
> Virtual machine 'fuel-master' is created and registered.
> UUID: 936a5c2b-20c6-4bc8-b8bf-3bf0597d6d48
> Settings file: 'C:\\Users\\Gibson\\VirtualBox
> VMs\\fuel-master\\fuel-master.vbox'
> Adding hostonly adapter to fuel-master and bridging with host NIC
> VirtualBox Host-Only Ethernet Adapter #2...
> Adding disk to fuel-master, with size 65535 Mb...
> 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
> Medium created. UUID: b7fde6e3-e648-4455-84d6-01e9e8f47a91
> Adding serial numbers of disks to fuel-master...Adding hostonly adapter to
> fuel-master and bridging with host NIC VirtualBox Host-Only Ethernet
> Adapter #3...
> Adding NAT adapter to fuel-master for outbound network access through the
> host system...
> VBoxManage.exe: error: Machine 'fuel-master' is not currently
> runningWaiting for VM "fuel-master" to power on...
> VM "fuel-master" has been successfully started.
> Waiting for product VM to install. Please do NOT abort the script...
> send: spawn id exp4 not open
>  while executing
> "send "logout\\r""
> ____________________________________________________________
> Homeowners Are In For A Big Surprise In 2016
> Average monthly savings from ...
> http://thirdpartyoffers.juno.com/TGL3131/56be45c991b9345c919d1st02vuc
> _______________________________________________
> mdlug mailing list
> mdlug at mdlug.org
> http://mdlug.org/mailman/listinfo/mdlug
>


_______________________________________________
mdlug mailing list
mdlug at mdlug.org
http://mdlug.org/mailman/listinfo/mdlug