[mdlug] Virtualbox, Openstack

[gib at juno.com]

Started an install  of Virtualbox with the intent to install Openstack. Ultimate goal is to set up Pivotal. Using these instructions: https://www.mirantis.com/how-to-install-openstack/ Got to the point where I execute the launch script in step 6.I see the fuel master running but not the additional 3 VMs.I don't know if the script will recover from the error below: Checking for VirtualBox Extension Pack... OK
Checking for Mirantis OpenStack ISO image... OK
Going to use Mirantis OpenStack ISO file iso/MirantisOpenStack-7.0.iso
Checking if SSH client installed... OK
Checking if ipconfig or ifconfig installed... OK
Setup is done.
Creating host-only interface
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interface VirtualBox Host-Only Ethernet Adapter #2 was successfully created
Disabling DHCP server on interface: VirtualBox Host-Only Ethernet Adapter #2...
Configuring IP address 10.20.0.1 and network mask 255.255.255.0 on interface: VirtualBox Host-Only Ethernet Adapter #2...
+ VBoxManage hostonlyif ipconfig 'VirtualBox Host-Only Ethernet Adapter #2' --ip 10.20.0.1 --netmask 255.255.255.0
+ set +x
Verifying interface VirtualBox Host-Only Ethernet Adapter #2 has IP 10.20.0.1 and mask 255.255.255.0 properly set.
OK.
Creating host-only interface
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interface VirtualBox Host-Only Ethernet Adapter #3 was successfully created
Disabling DHCP server on interface: VirtualBox Host-Only Ethernet Adapter #3...
Configuring IP address 172.16.0.254 and network mask 255.255.255.0 on interface: VirtualBox Host-Only Ethernet Adapter #3...
+ VBoxManage hostonlyif ipconfig 'VirtualBox Host-Only Ethernet Adapter #3' --ip 172.16.0.254 --netmask 255.255.255.0
+ set +x
Verifying interface VirtualBox Host-Only Ethernet Adapter #3 has IP 172.16.0.254 and mask 255.255.255.0 properly set.
OK.
Creating host-only interface
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interface VirtualBox Host-Only Ethernet Adapter #4 was successfully created
Disabling DHCP server on interface: VirtualBox Host-Only Ethernet Adapter #4...
Configuring IP address 172.16.1.1 and network mask 255.255.255.0 on interface: VirtualBox Host-Only Ethernet Adapter #4...
+ VBoxManage hostonlyif ipconfig 'VirtualBox Host-Only Ethernet Adapter #4' --ip 172.16.1.1 --netmask 255.255.255.0
+ set +x
Verifying interface VirtualBox Host-Only Ethernet Adapter #4 has IP 172.16.1.1 and mask 255.255.255.0 properly set.
OK.
Virtual machine 'fuel-master' is created and registered.
UUID: 936a5c2b-20c6-4bc8-b8bf-3bf0597d6d48
Settings file: 'C:\Users\Gibson\VirtualBox VMs\fuel-master\fuel-master.vbox'
Adding hostonly adapter to fuel-master and bridging with host NIC VirtualBox Host-Only Ethernet Adapter #2...
Adding disk to fuel-master, with size 65535 Mb...
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Medium created. UUID: b7fde6e3-e648-4455-84d6-01e9e8f47a91
Adding serial numbers of disks to fuel-master...Adding hostonly adapter to fuel-master and bridging with host NIC VirtualBox Host-Only Ethernet Adapter #3...
Adding NAT adapter to fuel-master for outbound network access through the host system...
VBoxManage.exe: error: Machine 'fuel-master' is not currently runningWaiting for VM "fuel-master" to power on...
VM "fuel-master" has been successfully started.
Waiting for product VM to install. Please do NOT abort the script...
send: spawn id exp4 not open
 while executing
"send "logout\r""
____________________________________________________________
Homeowners Are In For A Big Surprise In 2016
Average monthly savings from ...
http://thirdpartyoffers.juno.com/TGL3131/56be45c991b9345c919d1st02vuc