[mdlug] K3b error while writing DVD+R DL

[R. Kannan]

Thanks. This looks like a firmware issue because Windows XP on the same machine could not burn the image using that drive either.

-----Original Message-----
>From: Bob Dion <bobdion at starline-ent.com>
>Sent: Jun 30, 2008 1:50 PM
>To: rkannan at peoplepc.com, MDLUG's Main discussion list <mdlug at mdlug.org>
>Subject: Re: [mdlug] K3b error while writing DVD+R DL
>
>This site has a few things to try.
>http://k3b.plainblack.com/message-board/unable-to-send-dvdr-double-layer-recording-information-operation-not-permitted?pn=2
>
>The last of which suggests upgrading to growisofs v7.0
>
>Please note that the message was dated 9/16/2007
>
>hope this helps
>
>BD
>
>R Kannan wrote:
>> Hello,
>> 
>> I am trying to burn a DVD iso image (6.7GB) using K3b and I got the
>> following error. This is the first time I have tried to burn to a DVD+R
>> DL on this drive. Googling for this error did not yield a solution. Any
>> ideas?
>> 
>> TIA for any info
>> 
>> System
>> -----------------------
>> K3b Version: 0.12.14
>> 
>> KDE Version: 3.5.1 Level "a" 
>> QT Version:  3.3.5
>> Kernel:      2.6.16.13-4-default
>> Devices
>> -----------------------
>> SONY DVD+-RW DW-Q58A UDS2 (/dev/sr0, /dev/sg1) at /media/dvdrecorder
>> [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL]
>> [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW
>> Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW]
>> [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R;
>> Restricted Overwrite]
>> 
>> Used versions
>> -----------------------
>> growisofs: 6.1
>> 
>> growisofs
>> -----------------------
>> Executing 'builtin_dd if=/tmp/kde-kannan/k3b_image.iso of=/dev/sr0
>> obs=32k seek=0'
>> /dev/sr0: splitting layers at 1680320 blocks
>> :-[ SEND DVD+R DOUBLE LAYER RECORDING INFORMATION failed with
>> SK=5h/ASC=27h/ACQ=00h]: Input/output error
>> 
>> growisofs command:
>> -----------------------
>> /usr/bin/growisofs -Z /dev/sr0=/tmp/kde-kannan/k3b_image.iso
>> -use-the-force-luke=notray -use-the-force-luke=tty -dvd-compat
>> -speed=2.4 -use-the-force-luke=bufsize:32m 
>> 
>> 
>> _______________________________________________
>> mdlug mailing list
>> mdlug at mdlug.org
>> http://mdlug.org/mailman/listinfo/mdlug
>> 
>> 


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com