[mdlug] "Stop-A"... without a "Stop"

[Wojtak, Greg]

Yes, but you can set the OS to ignore Stop-A's.  Presumably you are
connected via the ALOM either serially or via ethernet.  The instructions I
gave assumed that. 

Greg

On 1/17/07 3:19 PM, "Joseph C. Bender" <jcbender at bendorius.com> wrote:

> Wojtak, Greg wrote:
>> If you are using a V440, #. will drop you to the ALOM, at which point you
>> type break and then console to get back on the console.  Keep in mind that a
>> running system may be configured to ignore break signals and will not drop
>> to the ok> prompt.  If that's the case, you'll need to get it on boot,
>> before the OS loads.
>> 
> Or get at ALOM via ethernet or the ALOM serial port.  IIRC you can send
> a break from ALOM even with a graphical console running.